RTG, RMG operator crane cabins

RTG crane - Rubber Tyred Gantry Crane

 

This type of gantry cranes to load and unload medium and large container ships, specially designed for stacking containers in a lot of levels, and is also designed to work on container platforms with their high demands on election of containers.

 

RMG crane - Rail Mounted Gantry Cranes

 

RMG cranes are suitable for container handling, permutations of cargoes, etc. on container platforms and railway container terminals.

 

Equipment of control cabins for RTG/RMG cranes:

 

  1. Construction of crane cabin is made of steel pipe sections welded together.
  2. Indoor and outdoor construction crane control cabin is made of steel sheet, 2.5 mm thick, forming a strong element.
  3. The cavities are filled with insulation (mineral wool) with a thickness of 50 mm.
  4. The floor is made of multilayer removable panels and covered a dielectric mat. Cables and wires lay under the floor. In the space provided for the underground tunnel for cable needed to connect electrical equipment in operator control unit.
  5. The windows are made of transparent glass triplex with different thicknesses depending on the floor construction (within the thickness of 6-40mm).
  6. Provided the opening of the upper front window and upper side windows on the gas springs. Glass mounted inside the control cabin with the pressure angles, allows an easy replacement of glass. Privacy applies to all windows triple protection along the perimeter of the crane cabin.
  7. Rear view mirrors.
  8. 3 pantograph windshield wiper.
  9. Sun rolled curtains on all the upper windows.
  10. Defogger device of frontal windows.
  11. Climate control split system conditioner on 2,5kW, 220V.
  12. Operator control station KP-4-250.
  13. Ceiling lamp 2 * 18W with switch, 220 V lamp connected by wires, which are brought under the floor.
  14. Possible lacquering and painting at the option of the Customer in accordance with the classification of colors RAL. According to GOST: the outer surface - yellow RAL 1003, interior - gray RAL 7047.

 

Possible options of control cabins for RTG/RMG cranes:

 

  1. Extra heating devices: air curtain (3 kW, 220V) or fan heater (2х2kW, 220V).
  2. Document pocket.
  3. Roof gutter for water drainage.
  4. Metal thermos for drinking with fastening.
  5. Large outside spoiler.
  6. Radio, CD-player.
  7. Additional sockets.
  8. Intercom.
  9. Bell loud fight.
  10. Tip-up seat.
  11. Shock absorbing mounting device.
  12. The pedal enabling sound alarm.
  13. Limit switch locking wicket of entrance platform.
  14. Control joysticks and other elements of command and control provided by the Customer in accordance with the electrical circuit.
  15. Indication panel on the operator control unit.
  16. Metal first aid kit with a set of medicines.
  17. Coat hook.
  18. Fire extinguisher with bracket.
  19. Removable entrance platform.
  20. Electrical cabinet according to information provided by the Customer electric scheme.

Download Questionnaire on cabins